Перейти к основному содержимому

Job Instructions

A job instruction defines the duties, rights and responsibility of a job title. Before an employee starts the work — when they are hired, transferred or start a combination — and every time the instruction changes, the employee must read it and sign that they have been acknowledged with it.

In SMART Payroll a job instruction is a record with a number and a version. It belongs to a job title and, optionally, to an organizational unit or to one employee. The text of the instruction is the Word layout of the Job Instruction report that is attached to the record. Every version keeps the list of employees who must be acknowledged with it and the mark of who already has been.

Step 1. Setup​

Path: Human Resources Setup → Job Instruction Nos.

Specify the number series used to assign numbers to job instructions. Without it you cannot create a job instruction.

The text of an instruction is prepared as a Word layout of the Job Instruction report. The report ships with the technical layout Job Instruction (technical) that contains all fields of the report. Download it on the Report Layouts page and use it as the starting point for the layouts of your instructions. The fields of the report are described in Step 5.

Step 2. Create a job instruction​

Path: Job Instructions → New

FieldDescription
No.The number of the job instruction. It is assigned from the number series and is shared by all versions of the instruction.
Version No.The version of the instruction. A new instruction gets version 1; the New Version action creates the next one.
DescriptionThe name of the instruction. If it is empty, it is filled with the name of the job title.
Job Title CodeThe job title the instruction applies to. Required for activation.
Org. Unit CodeThe organizational unit the instruction applies to. Leave it empty to apply the instruction to the job title in all organizational units.
Employee No.Fill it in for a personal instruction of one employee. The job title and the organizational unit are then taken from the employee.
StatusDraft, Active or Closed. See Step 3.
Starting DateThe date from which the instruction is in effect. Required for activation.
Ending DateThe last date on which the instruction is in effect. Leave it empty if the instruction has no end date.
Approval DateThe date on which the instruction was approved. If it is empty, the starting date is used when the instruction is activated.
Approval Order No.The number of the order that approved the instruction or its new version.
Responsible Employee No.The employee responsible for keeping the instruction up to date.
Layout NameThe Word layout with the text of the instruction. See below.
Print ModeHow the instruction is printed by default. See Step 5.
CommentA free comment.

The Documents FactBox keeps files attached to this version of the instruction, for example the scan of the approval order.

Attach the text of the instruction​

The text is attached in the Layout Name field or with the actions of the Print → Layout group:

  • Import Layout — select the .docx file with the text. It is saved as a separate layout of this version. If the version already has its own layout, it is replaced after confirmation. Available only for a draft.
  • Export Layout — download the layout, for example to edit the text in Word.
  • In the Layout Name field you can also select any existing layout of the Job Instruction report.

Step 3. Statuses and versions​

ActionDescription
ActivateMakes the instruction active. The job title and the starting date must be filled in; for a personal instruction, the employee. Another active instruction for the same job title and organizational unit (for a personal one, for the same employee) must not overlap its period. If an earlier version of the same instruction is active, it is closed on the day before the starting date of this version. A personal instruction adds its employee to the list of employees.
ReopenReturns an active instruction to draft. Possible only while no employee has been acknowledged with it.
CloseCloses the active instruction. If the ending date is empty, it is set to the work date. The list of employees of a closed instruction is read-only.
New VersionCreates the next version of the instruction as a draft with the same number. The employees who are not removed are copied to the new version without the acknowledgement mark: they must be acknowledged again. The layout is copied under the name of the new version, so the text that employees were acknowledged with stays unchanged. Attachments are not copied.
Copy FromCopies the job title, organizational unit, employee, responsible employee, print mode, comment and layout from another instruction into a draft. Employees are not copied. Use it to create an instruction for another organizational unit or a personal instruction based on a general one.

The fields of the header can be changed only in a draft. To change the text of an active instruction, create a new version.

On the Job Instructions list the versions are shown as a tree: the latest version of each instruction is the top row, and the earlier versions are listed under it. The Versions action of the card shows all versions of the instruction.

Step 4. Employees and acknowledgement​

The Employees part of the card lists the employees who must be acknowledged with this version of the instruction.

FieldDescription
Employee No., Employee NameThe employee. One employee can be in a version only once.
Job Title Code, Org. Unit Code, Position No.The job title, organizational unit and position of the employee when they were added to the instruction.
SourceHow the employee was added: Manual, Suggested, Hire, Transfer, Combination or New Version.
Contract No.The labor contract from which the employee was added.
Added DateThe date when the employee was added.
Due DateThe date by which the employee must be acknowledged, for example the first working day. It is shown in red when it has passed.
AcknowledgedThe employee has been acknowledged with the instruction. Can be set only for an active instruction.
Acknowledgement Date, Acknowledgement MethodWhen and how the employee was acknowledged: Paper, Electronic or DocFlow.
Removed, Removed DateThe employee no longer holds the job title, for example after a transfer or dismissal. The line stays for history and is not counted in the statistics.
CommentFor example, the reason why the employee refused to sign.
ActionDescription
Suggest EmployeesAdds the employees who currently hold the job title in the organizational unit, including combinations. Employees who are already in the list or have their own personal instruction are skipped.
Mark as AcknowledgedRecords the acknowledgement of the selected employees on the specified date and with the specified method.
Clear AcknowledgementRemoves the acknowledgement mark from the selected employees.
Mark as RemovedMarks the selected employees as no longer holding the job title.
Print for EmployeePrints a personalized instruction for each selected employee.

You can add an employee manually. An employee who has been acknowledged cannot be deleted from the list — mark them as removed instead.

The Job Instructions list shows the statistics of active and closed instructions: Employees, Acknowledged, Not Acknowledged (highlighted when some employees are not acknowledged yet, in red when some are overdue) and Overdue. For draft instructions these columns are empty.

Step 5. Print the job instruction​

Path: Job Instruction card → Print

The instruction is printed with its layout. The print mode is taken from the Print Mode field of the instruction; to choose another one, turn off Use Print Mode of Instruction on the request page.

Print ModeResult
SingleOne document for everyone.
Single with Employee ListOne document with the list of employees for signatures.
Per EmployeeA personalized document for each employee.

Turn on Only Not Acknowledged Employees to print only the employees who have not been acknowledged yet. When the report is printed for selected employee lines — from the Employees part, from the labor contract line, from the employee card or by DocFlow — it always prints a personalized document for each of them.

Main fields of the report for the layout:

FieldContent
DocTitleJOB INSTRUCTION, or WORK INSTRUCTION when the code of the job title in the Classifier of Professions starts with 5–9.
KPCode, KPNameThe code and the name of the job title in the Classifier of Professions.
JobTitleName, OrgUnitName, OrgUnitFullPathThe job title, the organizational unit and its full path (for example, Company \ Department \ Unit).
HeadOwnName, HeadJobTitleThe manager of the organizational unit.
DirOwnName, DirJobTitleThe director from the company information.
StartingDate, ApprovalDate, ApprovalOrderNoThe dates and the approval order of the instruction.
CopyEmployeeOwnName, CopyJobTitleNameThe employee of a personalized document.
ListEmployeeName, ListAcknowledgementDateThe lines of the list of employees.

Job instructions in the labor contract​

When a labor contract line of the Hire, Transfer or Combination type is approved — on its own or with a group order — the system looks for the active instruction for the position of the line on its starting date and adds the employee to it. The personal instruction of the employee is searched first, then the instruction of the job title in the organizational unit, then the instruction of the job title for all organizational units. If no instruction is found, nothing happens. The due date is the starting date of the line.

An employee can have several active instructions at the same time, for example one for the main position and one for each combination.

OperationWhat happens in the job instructions
TransferThe employee is marked as removed in the instructions of the previous main position, on the day before the transfer. Combinations are not affected.
DismissalThe employee is marked as removed in all instructions that are not closed, on the dismissal date.
End of a combinationThe employee is marked as removed only in the instruction of this combination.
Undo approvalThe employee is deleted from the instruction the line added them to (or marked as removed if already acknowledged). The lines that this contract line marked as removed become active again — for example, after a transfer to a wrong position.
Undo the end of a combinationThe line of this combination becomes active again.

On the labor contract line:

  • Line → Job Instruction opens the instruction of the employee for the position of the line.
  • Print → Print Job Instruction prints the personalized instruction. If the employee is not in the active instruction yet, the system offers to add them.

Job instructions of an employee​

Path: Employee card → Job Instructions

The page shows all instructions of the employee with the version, status, due date and acknowledgement. Acknowledged lines are shown in green, overdue ones in red, removed lines and lines of closed versions in grey. Use Job Instruction to open the instruction and Print to print the personalized instruction.

Signing with DocFlow​

With the SMART DocFlow for Payroll app, the employee can sign the instruction electronically.

  1. In the DocFlow setup wizard, select the Job Instruction (acknowledgement) template preset. It refers to the Job Instruction report without a layout: the layout of each instruction is applied automatically, so one template serves all instructions. If an instruction has no layout, the layout of the template is used.
  2. In the Employees part of the instruction or on the employee's Job Instructions page, select the line and choose Create DocFlow document from template. The document is created with the personalized instruction; the employee is the counterparty and the signer. Create DocFlow document from file links an existing file, for example an instruction that was already signed.

The DocFlow Status column shows the status of the document. The acknowledgement mark is not set automatically after signing — set it with Mark as Acknowledged and the DocFlow method.

© 2008 - 2026 SMART business